image-from-the-document-manager

Technical Information

 

logo_Olin_header_225x143.png

 

 

Olin offset paper: all you need is in.

Thanks to its versatility, Olin offers its users many choices.
It also boasts the best print quality in its category and meets
all the requirements of a genuine eco-friendly production process.

 

 

 

chbre_applications_247x148.jpg

Printing and handling guidelines

> Set up
Store at room temperature (17-23°C), at a relative humidity of 50%, from 24 to 48 hours before use.     
Protect the paper against any risk of moisture during the whole process. In particular, unwrap the paper
only at the last moment before printing and rewrap it immediately after the print run.
Do not use set-off powder when printing.

 

 

 

 

> Pre-press
Litho Offset suitable. Pre-printing: fully suitable
with Olin Regular from 120 to 150gsm.

> Printing
Large printed surface : under colour removal necessary.
Intense full colours: - black: blue support (40%) recommended.
Screen ruling: 150 max. Use of the Fogra 47 (uncoated)
profile is recommended, particularly when printing red tinted graphics.

>Finishing
Embossing and die-stamping: all techniques can be used.
Hot foil stamping: no precautions are necessary when using

the best foil for the chosen image and paper chosen.

Varnishing: possible but trials to be made first.
Lamination: not recommended.
Scoring: starting at 135gsm, scoring with counterpart.
Cutting: we recommend waiting 24 hours after printing.
Ensure that the blade of the guillotine is sharp enough
to order to avoid dust deposits.